Premium Signal Toolkit stacks nine trend and momentum modules on one MT4 or MT5 chart and puts a panel in the corner telling you what each one currently says. The panel is the reason to own it.

Gold H1: the cloud, the Range Filter step line, Smart Trail rails, arrows, and the nine-row state panel

The panel is a readout, not a vote

Nine rows: the signal engine, Range Filter, Smart Trail, SuperIchi, TBO, Trend Tracker, a reversal RSI with its numeric value, momentum, and where price sits relative to the reversal band.

Nothing combines them. There is no score, no majority, no weighting. Each row reports its own module's state and you do the reading.

That matters, because the rows disagree constantly and that is the point. Here the panel says the signal has been SELL for thirty-three bars while Range Filter, SuperIchi and Trend Tracker all say bullish:

EURUSD H4: the signal row short for thirty-three bars while three other rows read bullish

A tool that averaged those into one number would have hidden the most useful thing on the screen. Nine modules that agree is a different market from nine that don't, and you can only see that if they're reported separately.

Where the arrows come from

Only from the first row, and it takes two conditions:

  • A SuperTrend built on ATR(11) with sensitivity as the multiplier — 5.5 by default, which is wide — has just been crossed by the close.
  • The close is on the correct side of a 13-bar simple average.

That's it. The other eight modules draw their own lines and fill their own panel rows, and none of them gates the arrow. If you want them to, that's your job and the panel is there to make it possible.

sensitivity runs from 0.5 to 12. Lower means a tighter SuperTrend and many more arrows.

The other eight

Range Filter — the stepped line that holds a level until price moves far enough. The main trend read.
Smart Trail — an ATR trail with a smoothing pass, drawn as the dashed rails either side.
SuperIchi — Tenkan, Kijun and the filled Kumo. That's the large shaded region.
TBO — a second, smaller set of arrows from a separate fast/medium crossover, optionally combined with an RSI band.
Trend Tracker — a band, off by default.
Reversal RSI — reports the value and flags overbought above 75 or oversold below 25, and drives the "Reversal Up" and "Reversal Down" text on the chart.
Momentum — direction plus whether it is rising or falling, from a MACD.
Reversal band — the dotted rails from a 50-bar basis at a deviation of 11, and the panel's last row says whether price is inside, above or below.

Plus TP points (major on by default, minor off), support and resistance with an optional zone mode, an optional PSAR, and optional MACD candle colouring.

Where it's weak

The Kumo swallows the chart on MT5. With SuperIchi on and its cloud filled, a large part of the screen is a solid shaded block with the candles inside it. On gold H1 above, most of the middle of the chart is cloud. It's the first thing I'd turn off if I wanted to read price, and Show_SuperIchi does that. MQL4 has no fill primitive, so the MT4 build draws the cloud as two lines and stays much more readable.

Nine modules is a lot of lines. Range Filter, Smart Trail, Tenkan, Kijun, Kumo, the reversal rails and the S/R lines are all on by default. Everything here can be switched off individually, and you should.

Alerts fire on the forming bar unless you change it. There's an AlertConfirmed switch. Turn it on.

The signal is a very wide SuperTrend. At the default sensitivity of 5.5 you get few arrows, and each one arrives well after the turn. That's the honest trade-off of a wide band, and it's adjustable.

The panel has no history. It shows the current state only. There's no way to see what the nine rows looked like at a signal two days ago, which is exactly when you'd want to know.

The panel is at a fixed corner position. It can sit over recent price action on a busy chart.

Nothing here is unique on its own. Every one of the nine modules exists elsewhere. What you're buying is having them on one chart with one panel, on both platforms, from one file.

Questions you'll have

Does the panel give me a score? No. Each row reports its own module. Nothing is combined.

What makes an arrow appear? A SuperTrend cross plus price on the right side of a 13-bar average. The other eight modules don't gate it.

Why does the panel disagree with the arrow? Because the arrow uses one module and the panel reports nine. That disagreement is the signal that the modules are not aligned.

How do I get more arrows? Lower sensitivity. It's the SuperTrend's ATR multiplier and 5.5 is wide.

Does it repaint? Arrows on the forming bar can appear and disappear as the bar develops; closed bars are stable. Set AlertConfirmed so alerts wait for the close.

How do I make the chart readable? Turn off Show_SuperIchi first, then whichever of the rails you don't use. The panel keeps reporting a module even when it isn't drawn.

What are the small second arrows? TBO — a separate crossover module, drawn smaller and further from the bar than the main signal.

Can an EA read it? The module lines are plotted buffers. The arrows, labels and panel are chart objects.

Best timeframe? H1 and H4. At the default sensitivity, lower timeframes give very few arrows.

MT4? Both platforms are included, one download each. Same nine modules, same panel. The Kumo isn't shaded on MT4 — MQL4 has no fill — so the chart is noticeably cleaner there.

Support

Send me a message with a screenshot, the symbol and the timeframe, and I'll tell you what the tool was doing on that bar.

Analysis tool. It places no trades and makes no profitability claim. Past price behaviour is not a guide to future price behaviour.